Filter
Top Products
Quick Guide
CGP-1000 Owner’s Manual
30
Using the Pedals
The instrument features three pedals.
● Damper Pedal (Right)
The damper pedal performs the same function as the damper pedal on an
actual acoustic piano, letting you sustain the sound of the voices even
after releasing the keys.
• Some Voices may sound continuously or have a long decay after the notes
have been released while the damper pedal is held.
• Certain Voices in the “PERCUSSION & DRUM KIT,” “GM&XG” and “GM2”
groups may not be affected by use of the damper pedal.
● Sostenuto Pedal (Center)
If you play a note or chord on the keyboard and press the sostenuto pedal
while holding the note(s), the notes will sustain as long as the pedal is
held. All subsequent notes will not sustain.
• Certain Voices, such as [STRINGS] or [BRASS], sustain continuously when
the sostenuto pedal is pressed.
• Certain Voices in the “PERCUSSION & DRUM KIT”, “GM&XG” and “GM2”
groups may not be affected by use of the sostenuto pedal.
● Left Pedal
When the Piano voice is selected, pressing this pedal reduces the volume
and slightly changes the timbre of the notes you play.
The settings assigned to this pedal may differ depending on the selected Voice.
n The depth of the left pedal effect can be adjusted (page 101).
● Foot Controller/Footswitch
An optional Yamaha foot controller (FC7) or footswitch (FC4 or FC5) can be connected to the AUX PEDAL jack and
used to control various functions assigned (page 191).
Using the Metronome
The metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and
check how a specific tempo sounds.
Damper Pedal
Sostenuto Pedal
Left Pedal
When you press the damper pedal
here, the notes you play before you
release the pedal have a longer sustain.
n
When you press the sostenuto
pedal here while holding the
note(s), the notes will sustain as
long as you hold the pedal.
n
Making Settings for the Pedals
You can assign one of the various functions to the three pedals or an optional foot controller/footswitch, doing things
like controlling the Super Articulation voices (page 78) or starting and stopping the Style (
page 191).
1 Press the METRONOME [ON/OFF] button to start the metronome.
2 To stop the metronome, press the METRONOME [ON/OFF] button again.