Filter
Top Products
Using Your Instrument with Other Devices
CGP-1000 Owner’s Manual
192
Details on the pedal functions are listed here. For functions indicated with “
*
“, use only the foot controller; proper
operation cannot be done with a footswitch.
Assignable Pedal Functions
VOLUME* Allows you to use a foot controller to control the volume. This function is available only
for the pedal connected to the instrument’s AUX PEDAL jack.
SUSTAIN Allows you to use a pedal to control the sustain. When you press and hold the pedal,
all notes played on the keyboard have a longer sustain. Releasing the pedal immedi-
ately stops (damps) any sustained notes.
SOSTENUTO Allows you to use the pedal as a sostenuto pedal. In other words, if you play a note or
chord on the keyboard and press the pedal while holding the note(s), the notes will sus-
tain as long as the pedal is held. However, all subsequent notes will not sustain. This
makes it possible to sustain a chord, for example, while other notes are played staccato.
SOFT Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the vol-
ume and changes the timbre of the notes you play. This is effective only for certain
appropriate Voices.
GLIDE When the pedal is pressed, the pitch changes, and then returns to normal pitch when
the pedal is released.
PORTAMENTO The portamento effect (a smooth slide between notes) can be produced while the pedal
is pressed. Portamento is produced when notes are played legato style (i.e., a note is
played while the preceding note is still held). Portamento Time can also be adjusted
from the Mixing Console (page 90). This function does not affect certain Natural Voices,
which would not sound appropriately with this function.
PITCH BEND* Allows you to bend the pitch of notes up or down by using the pedal.
MOD/S.ART1* Applies a vibrato effect to notes played on the keyboard. Moreover, various effects can
be added to the S. Articulation Voice (page 78). The effect becomes deeper when press-
ing down the foot controller. You can turn this function on/off for each keyboard part on
this display.
MOD/S.ART2 (ALT) As a variation on MOD/S.ART1, the effects (waveform) can be switched on/off by the
pedal/footswitch. The effects (waveform) is alternately turned on and off each time the
pedal/footswitch is pressed. You can turn this function on/off for each keyboard part on
this display.
S.ART SW When you use a S. Articulation voice that has an effect assigned to the pedal/foot-
switch, you can enable the effect by pressing the pedal/footswitch. You can turn this
function on/off for each keyboard part on this display.
DSP VARIATION Switches Voice Effect DSP VARIATION on and off.
VIBE ROTOR ON/OFF Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE effect type is
selected.
HARMONY/ECHO Switches the HARMONY/ECHO Voice Effect on and off.
VOCAL HARMONY Switches the Vocal Harmony function on and off.
TALK Switches the MIC SETTING Talk function on and off.
SCORE PAGE+ While the song is stopped, you can turn to the next score page.
SCORE PAGE– While the song is stopped, you can turn to the previous score page.
LYRICS PAGE+ While the song is stopped, you can turn to the next lyrics page.
LYRICS PAGE– While the song is stopped, you can return to the last lyrics page.
TEXT PAGE+ You can turn to the next text page.
TEXT PAGE– You can return to the last text page.
SONG PLAY/PAUSE Same as the SONG [PLAY/PAUSE] button.
STYLE START/STOP Same as the STYLE CONTROL [START/STOP] button.
TAP TEMPO Same as the [TAP TEMPO] button.
SYNCHRO START Same as the [SYNC START] button.
SYNCHRO STOP Same as the [SYNC STOP] button.
Using the Footswitch or Foot Controller ([AUX PEDAL] jack)