Filter
Top Products
CGP-1000 Owner’s Manual
212
Appendix
11 Attach the pedal brace rods.
Insert the pedal brace rods into the pedal box
recesses and make sure they fit securely, then tighten
the screws (4.0 X 20mm) to attach the rods.
12 Connect the AC power cord.
■ After completing the assembly, please check
the following.
• Are there any parts left over?
→ Review the assembly procedure and correct any
errors.
• Is the Clavinova clear of doors and other movable
fixtures?
→ Move the Clavinova to an appropriate location.
• Does the Clavinova make a rattling noise when you
shake it?
→ Tighten all screws.
• Is the power cord inserted securely into the sockets?
→ Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the assem-
bly diagrams and retighten all screws.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper han-
dling can result in damage to the instrument or personal
injury.
Top portion
Key cover
Do not hold here.