Filter
Top Products
CLP-295GP Owner’s Manual 115
Appendix
Installing the Floppy Disk Drive (Optional)
The optional UD-FD01 floppy disk drive can be installed to the bottom of the instrument by using the included
floppy disk drive case and screws.
1. Remove the three backing papers
from the adhesive tape in the case,
and fit the floppy disk drive into the
case.
2. Fold the USB cable inside the case as
shown.
3. Attach the drive and case assembly
to the left underside of the instru-
ment, using the included four screws
(4mm x 10mm).
4. Connect the USB cable to the USB
[TO DEVICE] terminal.
Have a Phillips-head (+) screwdriver ready.
Insert the drive to the case, with the side
having the rubber stoppers facing the case.
Dual-sided adhesive tape