Filter
Top Products
80 CLP-295GP Owner’s Manual
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
You can set the [CHORUS] button on or off for
each voice. When you select a voice, the chorus on/
off setting for the voice automatically changes
according to this parameter.
Even if this parameter is turned on, the chorus effect is dis-
abled if the ChorusSend parameter is set to 0.
See the procedure on page 71.
Setting range:
On/Off
You can select other effects (than reverb and cho-
rus).
See the procedure on page 71.
Setting range:
DelayLCR Delay applied at left, center, and
right positions.
DelayLR Delay applied at left and right posi-
tions.
Echo Echo-like delay
CrossDelay Left and right delays are crossed.
Symphonic Adds a rich and deep acoustic effect.
Rotary Adds the vibrato effect of a rotary
speaker.
Tremolo The volume level changes in rapid
cycles.
VibeRotor The vibrato effect of a vibraphone.
AutoPanThe sound pans left to right and
back and forth.
Phaser The phase changes periodically,
swelling the sound.
AutoWahThe center frequency of the wah fil-
ter changes periodically.
SoundBoard Simulates the reverberation of a
piano soundboard.
Off No effect.
Rotor= The rotating portion of an electrical device etc.
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
This sets the speed of the vibrato effect that is
applied when you have selected Vibraphone and
are using the VibeRotor pedal.
See the procedure on page 71.
Setting range:
1 - 10
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
It turns on/off the vibrato effect that is applied
when you use the VibeRotor pedal.
See the procedure on page 71.
Setting range:
On/Off
Setting the chorus on/off
[ChorusOnOff]
Selecting the DSP type*
[DSP Type (DSP)]
TIP
B
D
NO YES
A
C
Main Set?-->
ChorusOnOff Off
B
D
NO YES
A
C
Main Set?-->
DSP Type DelayLCR
Setting the speed of the vibraphone
vibrato effect* [VibeRotorSpeed]
Turning the vibraphone vibrato effect
on/off*
[VibeRotorOnOff (RotorOnOff)]
TERMINOLOGY
B
D
NO YES
A
C
Main Set?-->
VibeRotorSpeed 6
B
D
NO YES
A
C
Main Set?-->
VibeRotorOnOff On