Filter
Top Products
CLP-295GP Owner’s Manual 69
Detailed Settings
Detailed Settings
Voices [VOICE SETTING]
In Dual mode, parameters with the “ ” mark are set for Voice 1 and Voice 2 individually.
iAFC [iAFC SETTING]
Settings Parameter name Reference page
Setting the octave* Octave 78
Setting the volume level* Volume 78
Setting the position of right and left channels* Pan 78
Make fine adjustments to the pitch (only in Dual mode) Detune 78
Selecting the reverb type ReverbType 79
Setting the reverb depth* ReverbSend 79
Selecting the chorus type ChorusType 79
Setting the chorus depth* ChorusSend 79
Setting the chorus on/off ChorusOnOff 80
Selecting the DSP type* DSP Type (DSP) 80
Setting the speed of the vibraphone vibrato effect* VibeRotorSpeed 80
Tur ning the vibraphone vibrato effect on/off*
VibeRotorOnOff
(RotorOnOff)
80
Setting the rotation speed of the rotary speaker* RotarySpeed (Rot.Speed) 81
Adjusting the depth of the DSP effect* DSPDepth 81
Adjusting the brightness of the sound* Brightness 81
Adjusting the resonance effect*
HarmonicContent
(Harmonic)
81
Adjusting the low-range frequency of the equalizer* EQ LowFreq. (EQ L.Freq) 81
Adjusting the low-range gain (amount of boost/cut) of the
equalizer*
EQ LowGain 82
Adjusting the high-range frequency of the equalizer* EQ HighFreq. (EQ H.Freq) 82
Adjusting the high-range gain (amount of boost/cut) of the
equalizer*
EQ HighGain 82
Setting the touch sensitivity* TouchSense 82
Settings Parameter name Reference page
Tur ning iAFC on/off iAFC 83
Adjusting the Dynamic Damper Effect depth DynDmpFX Depth 83
Adjusting the Spatial Effect depth SpatialFX Depth 84
Calibration (automatic adjustment) Calibration 84
Restoring the default calibration setting iAFC Default 84
*