Filter
Top Products
49
Utility Functions
NORMAL Standard SMF Mode. Standard Clavinova voice assignments (unless a “GM
ON” message is included in the data). Track 10 not necessarily drums.
GM GM SMF Mode. General MIDI voice assignments. Track 10 is always drums.
NOTES
• The Standard SMF mode is useful when playing back a disk containing Standard
MIDI Files created on an external sequencer using the Clavinova panel voice assign-
ments.
• The GM SMF mode is automatically selected (GM) whenever the POWER switch is
turned on.
■ 15: Quantize Song Data
This function “quantizes” song memory data that has already been recorded to disk. This means that all notes are aligned
to the nearest specified beat, thereby “tightening up” the overall timing.
ZInsert the Disk and Select a Song .........................................................................................................
Make sure that the disk containing the song you want to quantize is loaded in the
Clavinova disk drive, and that the song to be quantized is selected.
XSelect the Quantize Song Data Function .............................................................................................
⁄¤‹›‚15 QUANTIZE
NO/YES
Select the Quantize Song Data function — see “Selecting & Using the Utility Func-
tions”, page 42. “NO/YES” will flash on the display. Press the TEMPO [s] button
(YES) to engage the Quantize function or the [t] button (NO) to cancel. Once you’ve
pressed the TEMPO [s] button to engage the function you can release the [UTIL-
ITY] button.
CSelect the Quantize Value ......................................................................................................................
Use the TEMPO [s] and [t] buttons to select the desired quantize value, as
shown on the display:
OFF: “Free”. No quantization.
32: All notes aligned to the nearest 32nd note.
16: All notes aligned to the nearest 16th note.
8: All notes aligned to the nearest 8th note.
24: All notes aligned to the nearest 16th note triplet.
12: All notes aligned to the nearest 8th note triplet.
6: All notes aligned to the nearest quarter note triplet.
TRACK ––
QUANT. 16 PRESS [START]
3
3
3
VSelect a Track .........................................................................................................................................
Use the [TAP] and [METRONOME] buttons to select the track you want to
quantize.
NOTES
• Up until this point you can exit from the Quantize Song Data function at any time by
pressing the [UTILITY] button.
TRACK 2
QUANT. 16 PRESS [START]
BQuantize the Data ...................................................................................................................................
Press the [START/STOP] button to begin quantization. During quantization the
number of the measure being quantized will appear in the lower right corner of the
display. The Quantize Song Data function will automatically be exited when the data
has been quantized.
NOTES
• Once quantized, song data cannot be returned to its original “free” form. It is there-
fore a good idea to make a backup copy of the data before using this function.
• Only song data created by the CVP-89, CVP-87A, CVP-85A or CVP-83S can be
quantized. Data converted by the Convert to DOC function (page 52) or Convert to
SMF function (page 53) cannot be quantized.
• Only note and voice data is quantized.