Filter
Top Products
56
Utility Functions
■ 24: Program Change ON/CANCEL
Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or keyboard,
causing the selected Clavinova voice to be affected by pedal and other “control” settings received from the controlling de-
vice. The Clavinova also transmits MIDI control change information when either of its pedals are operated.
This function makes it possible to cancel control change data reception and transmission if you do not want the
Clavinova voices to be affected by control change data received from an external device or vice versa. Control Change is
automatically turned ON when the power is initially turned on.
■ 25: Control Change ON/CANCEL
ZSelect the Control Change ON/CANCEL Function ..............................................................................
Select the Control Change ON/CANCEL function as described in “Selecting &
Using the Utility Functions” (page 42), or press [VIBES] while holding [UTILITY].
⁄¤‹›‚25 CONTROL CHANGE
ON
XTurn Control Change ON or CANCEL...................................................................................................
Use the TEMPO [s] and [t] buttons or the [VIBES] button to turn local control
reception and transmission ON or OFF as required.
5
VIBES
5
VIBES
= control change reception/
transmission CANCEL.
= control change reception/
transmission ON.
Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard or other
MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova will normally also send
a MIDI program change number whenever one of its voices is selected, causing the correspondingly numbered voice or
program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change
numbers.
This function makes it possible to cancel program change number reception and transmission so that voices can be se-
lected on the Clavinova without affecting the external MIDI device, and vice versa. Program Change is automatically turned
ON when the power is initially turned on.
ZSelect the Program Change ON/CANCEL Function ............................................................................
Select the Program Change ON/CANCEL function as described in “Selecting &
Using the Utility Functions” (page 42), or press [HARPSICHORD] while holding
[UTILITY].
⁄¤‹›‚24 PROGRAM CHANGE
ON
XTurn Program Change ON or CANCEL.................................................................................................
Use the TEMPO [s] and [t] buttons or the [HARPSICHORD] button to turn
program change reception and transmission ON or OFF as required.
= program change reception/
transmission CANCEL.
= program change reception/
transmission ON.
4
HARPSI-
CHORD
4
HARPSI-
CHORD