Filter
Top Products
113
5
Repeat as Required and Exit When Done
Repeat steps 2 and 4, above, to revoice the tracks as required, then press the
[REVOICE] button so that its indicator goes out to exit from the REVOICE mode.
• The REVOICE mode will
automatically be exited if
the MENU [
▲
] and [
▼
]
buttons are used to select
any of the menus to the
left of the display.
• Save any revoice settings
you want to keep to the
PSR-730/630 REGISTRA-
TION MEMORY (page
57). The revoice setting
are temporary and will be
lost if the power is turned
off, a different style is se-
lected, or a REGISTRA-
TION MEMORY is re-
called.
4
Select and Edit the Revoice Parameters
Use the SUB MENU [▲] and [▼] buttons to select the desired parameter. The
name of the selected parameter will appear on the top line of the display to the right
of the parameter’s current value. Use the [–] and [+] buttons, the number buttons,
or the data dial to set the parameter’s value as required. Refer to the “Revoice
Parameters” chart on page 110.
Revoicing
REVOICE
• “- - -” will appear on the
top line of the display if
you select an accompani-
ment track which contains
no data for revoicing, and
revoicing will not be pos-
sible.
• Minus settings for the Oc-
tave and Pan parameters
can be directly entered by
pressing the appropriate
number button while hold-
ing the [–] button.
• When a voice (especially
bass voices) used for a
Style is changed from the
XG Voice to the Panel
Voice using the Revoice
function, the octave
played for the voice may
change.