Filter
Top Products
71
• When the selected file
type is “All,” “Style +
Reg,” “Pad + Regist,”
“Style + Pad,” step 5
is not necessary. Pro-
ceed from step 6.
5
Select the Data to Be Loaded If Necessary
If the file type selected in step 4 was “Style,” “Pad,” or “Regist,” press the SUB
MENU [▼] button so that the sub menu “Source:....” (load data selection screen) is
displayed.
File Type Source Destination
Style Style 1-4, All Style 1-4 (User Style 101-104)
Pad Pad bank 1-4, All Pad bank 1-4 (User Pad 37-40)
Regist Regist bank 1-32 All Reg. bank 1-32
● Source Selection
Use the [–] and [+] buttons or the Data Dial to select the load source.
If “All” is selected, all the data will be loaded.
By setting the “source” and “destination,” the data can be individually loaded (or
loaded as a group).
Style ....... A single Style can be extracted from the file 4 Styles saved together on the
disk and loaded into one of the PSR-730/630 User Style 101-104.
Pad ......... A single bank can be extracted from the file 4 banks saved together on the
disk and loaded into one of the PSR-730/630 User Pad banks 37-40.
Regist .... A single bank can be extracted from the file 32 banks saved together on the
disk and loaded into one of the PSR-730/630 Registration banks 1-32.
le 1 AllSource:
le 2 StySource:
● Select the Destination
Press the SUB MENU [▼] button so that “Destination:....” appears on the display.
Use the [–] and [+] buttons, [1]–[0] number buttons, or the Data Dial to select the
destination for the data.
Press the SUB MENU [▼] button so that “Execute NO/YES” (load execution
screen) appears on the display.
le 4ion:StyDestinat
Disk Operations