Filter
Top Products
53
■ Setting the Gain (User Setting)
You can change the settings for any of the 5 preset equalizer types, adjusting the output
to meet your own needs.
Select the equalizer type you wish to use as a base for your settings, then use the
SUB MENU [▼] and [▲] buttons to select “LowGain”.The current LowGain value for
the type you selected will be shown on the right of the upper line of the display.
Use the [–] and [+] buttons, the [1]–[0] number buttons, or Data Dial to set the
LowGain amplitude change within a range of -12 to 0 to +12 decibels [dB].
Switch to each of the other bands: “LowMidGain,” “MidGain,” “HighMidGain,”
and “HighGain”, and set them in the same way as the “LowGain.”
After finishing the gain settings, use the SUB MENU [▼] and [▲] buttons to select
“EQ Type”. “** User” will appear on the right of the top line of the display.
Digital Effects
** UseEQ Type: r
+ 4LowGain: