Item Values Explanation
NOTE It is best to change the REt setting in the
program or printer driver. (Program and printer-
driver settings override control-panel settings.)
The default setting is MEDIUM.
ECONOMODE ON
OFF
Use EconoMode to use less toner per page. Selecting ON
extends the life of the toner supply and reduces the cost per
page. However, it also reduces print quality. The printed
image is lighter, but it is adequate for printing drafts or
proofs.
NOTE It is best to turn EconoMode on or off in the
program or printer driver. (Program and printer-
driver settings override control-panel settings.)
The default setting is OFF.
CAUTION HP does not recommend full-time use
of EconoMode. If EconoMode is used full-time, the
toner supply might outlast the mechanical parts in
the print cartridge.
TONER DENSITY 1 to 5 Lighten or darken the print on the page by setting the toner
density. Select a setting ranging from 1 (light) to 5 (dark).
The default setting of 3 usually produces the best results.
CREATE CLEANING PAGE There is no value to select.
Press to print a cleaning page (for cleaning toner from
the fuser). Follow the instructions on the cleaning page. For
more information, see
Cleaning the printer.
PROCESS CLEANING
PAGE
There is no value to select. This item is available only after a cleaning page has been
created. Follow the instructions that are printed on the
cleaning page. The cleaning process might take up to
2.5 minutes.
System Setup submenu
Items on this menu affect printer behavior. Configure the printer according to your printing needs.
Item Values Explanation
DATE/TIME DATE
DATE FORMAT
TIME
TIME FORMAT
Sets the date and time settings.
JOB STORAGE LIMIT 1 to 100 Specifies the number of quick copy jobs that can be stored
on the printer.
The default setting is 32.
JOB HELD TIMEOUT OFF Sets the amount of time that held jobs are kept before being
automatically deleted from the queue.
ENWW Configure Device menu 29
