Item Values Explanation
CONTINUE: The printer continues to print, and the
REPLACE CARTRIDGE message appears until you replace
the print cartridge. HP does not guarantee print quality if you
select CONTINUE after a REPLACE CARTRIDGE
condition. Replace the print cartridge as soon as possible to
ensure good print quality.
If the end of drum life is reached, the printer stops,
regardless of the CARTRIDGE OUT setting.
The default setting is CONTINUE.
JAM RECOVERY AUTO
OFF
ON
Determines how the printer behaves if a jam occurs.
AUTO: The printer automatically selects the best mode for
printer jam recovery (usually ON).
OFF: The printer does not reprint pages following a jam.
Printing performance might be increased with this setting.
ON: The printer automatically reprints pages after a jam is
cleared.
The default setting is AUTO.
RAM DISK AUTO
OFF
Determines how the RAM disk is configured.
AUTO: Allows the printer to determine the optimal RAM-disk
size based on the amount of available memory.
OFF: The RAM is disabled.
NOTE If you change the setting from OFF to
AUTO, the printer automatically reinitializes when it
becomes idle.
The default setting is AUTO.
LANGUAGE ENGLISH
Several
Selects the language for the messages that appear on the
printer control-panel display.
The default setting is ENGLISH.
32 Chapter 2 Control panel ENWW
