Filter
Top Products
Chapter 1 - Setting Up
14 Q20 Reference Manual
Stereo. In the case where a stereo instrument, such as a keyboard or sampler, is
connected to two separate channels of a mixing console, you will need two 1/4" TRS
cables, one for each channel. The connection is made in a similar fashion as
described above.
Left
Input
Left
Output
Left
Insert
Right
Input
Right
Output
Right
Insert
Using Main Outputs
When you want to effect everything on the mixer, you can connect the Q20 between
the mixerÕs outputs and the amplifierÕs or tape machineÕs inputs. This is done by
using two cables to connect the Left and Right Main Outputs of the mixing console to
the [L] and [R] INPUTs of the Q20. The [L] and [R] OUTPUTs of the Q20 are then
connected to a stereo amplifier, or two input channels of another mixing console (for
sub-mixing applications).
Left
Input
Left
Output
Right
Input
Right
Output
Left
Master
Out
Right
Master
Out
Power
Amp
Left
Input
Power
Amp
Right
Input
Out to Speakers