Filter
Top Products
Chapter 6 - Advanced Applications
90 Q20 Reference Manual
If sending a single Program, the display will not change when the
[VALUE/ENTER] button is pressed, since this effectively takes no time at all.
➈ When you send a SysEx dump back to the Q20, it will automatically go into
receive mode (you do not have to do anything special). When this occurs, the
display will momentarily read:
RECEIVING MIDI DATA...
If you donÕt want the Q20 to receive SysEx dumps, go to MIDI Page 5, and set System
Exclusive Receive to OFF.
MIDI Thru
In order to pass on MIDI information from a control device thru the Q20 to another
MIDI device:
➀ Connect the control deviceÕs MIDI OUT to the Q20Õs [MIDI IN].
➁ Connect the Q20Õs [MIDI OUT] to the MIDI IN of the other device you wish to
control.
➂ Press [MIDI].
The [MIDI] LED will light.
➃ Press [PAGE >] four times to advance to MIDI Page 4.
The display will read:
MIDI THRU: O FF
➄ Turn the [VALUE/ENTER] knob to the right to turn MIDI Thru ÒONÓ.
MIDI THRU: O N