Filter
Top Products
E-51
Registration Memory
You can assign setups into one of 32 areas, which you can
select using BANK buttons 1 through 4 and the four
REGISTRATION buttons. Area names range from 1-1
through 8-4 as shown below.
Whenever you save a setup and assign it a setup name,
any setup data previously assigned to that name is
replaced with the new data.
You can use the keyboard’s MIDI capabilities to save your
setup data to a computer or other external storage device.
See “Using the Data Download Service” on page E-82 for
details.
1. Select a tone and rhythm, and otherwise set up
the keyboard the way you want it.
See “Registration Memory Settings” on page E-50
for details on what data is stored in the
registration memory.
2. Use the BANK button or the number buttons to
select the bank you want.
If you do not perform any operation for about
five seconds after pressing the BANK button, the
display returns to the contents in step 1, above.
Bank 1 selected.
3. While holding down the STORE button, press a
REGISTRATION button (1 to 4).
The following display appears when you press
the 2 button.
4. Release the STORE and REGISTRATION
buttons.
The setup is saved as soon as you press a
REGISTRATION button in step 3, above.
Setup Names
1 Use the BANK button to select the bank. Each press of
BANK cycles through the bank numbers from 1 to 8.
2 Pressing one of the REGISTRATION buttons (1 to 4)
selects the corresponding area in the currently selected
bank.
To Save a Setup in Registration
Memory
705A-E-053B