Filter
Top Products
E-59
Song Memory Function
The following describes a number of different variations you
can use when recording to Track 1 using step recording. All
of these variations are based upon the procedure described
under “To record chords with step recording” on page E-57.
J To start accompaniment with an intro pattern
In step 4, press INTRO/ENDING 1 or INTRO/ENDING 2
button after the SYNCHRO/FILL-IN NEXT button.
J To switch to a rhythm variation
In step 5, press VARIATION/FILL-IN 1 or VARIATION/
FILL-IN 2 button immediately before inputting the chord.
J To insert a fill in
In step 5, press VARIATION/FILL-IN 1 or VARIATION/
FILL-IN 2 button at the measure or beat immediately before
the chord or beat where you want to insert the fill in.
J To insert an ending
In step 5, press INTRO/ENDING 1 or INTRO/ENDING 2
button at the measure or beat immediately before the chord
where you want to insert the ending.
The length of the ending depends on the rhythm you are
using. Check the length of the pattern you are using and set
the length of the chord accordingly in step 6. Making the
chord too short in step 6 can result in the ending pattern
being cut off.
J To step record chords without rhythm
Skip step 4. The specified chord of the length specified by the
number buttons is recorded. A rest can be specified here, so
an original chord pattern can be created.
J To add chord accompaniment part way through
rhythm play
In place of step 4 at the start of the recording, press
VARIATION/FILL-IN 1 or VARIATION/FILL-IN 2 button
and input rests. Then in step 5, input the chords. Only rhythm
is played where you input the rests, and then chord play
starts after the rests.
Track 1 of the keyboard’s song memory records Auto
Accompaniment and keyboard play. In addition, there are
five other melody tracks that you can use to record melody
parts only. You can record different tones to the melody
tracks and build a full ensemble of instruments for your
recordings. The procedure you use for recording to Tracks 2
through 6 is identical to the one you use when recording to
Track 1.
You can record to Tracks 2 through 6 while playing back what
you originally recorded on Track 1 and any other tracks that
are already recorded.
1. Press the SONG MEMORY button twice to
enter record standby, and then use the number
buttons to select a song number (0 to 4).
The song number you select should be the one
where you previously input Track 1.
2. Use the SONG MEMORY TRACK buttons to
select the track you want to record to (2 through
6).
While the keyboard is in record standby, the
display shows the level meters for channels 11
through 16, so you can check which tracks have
already been recorded. See “Level Meter
Contents During Record/Edit Standby” on page
E-61 for details.
3. Make the following settings.
Tone number
Tempo
4. Press the START/STOP button to start
recording.
At this time, the contents of any tracks that are
already recorded start to play back
Optional pedal operation you perform is also
recorded.
5. Use the keyboard to play what you want to
record the track you selected.
6. Press the START/STOP button to end
recording when you are finished.
Track 1 Step Recording Variations
Recording Multiple Tracks
To record to Tracks 2 through 6 using real-
time recording
705A-E-061B