DSP Algorithm List
E-94
J 28 :2-Tap Delay
Function
This is left/right 2-tap delay.
Parameters
The following “Multi” algorithms are used in
combination with the algorithms described above.
Parameters are shared by both types of algorithms.
J M00 :Multi00 (Sin 2-Phase Chorus – 2-Tap Delay)
Function
This is a multi effector that is related to Sin 2-Phase
Chorus – 2-Tap Delay.
Parameters
J M01 :Multi01 (3-Phase Chorus – 3-Tap Delay)
Function
This is a multi effector that is related to 3-Phase Chorus –
3-Tap Delay.
Parameters
J M02 : Multi02 (Phaser – 3-Phase Chorus)
Function
This is a multi effector that is related to Phaser – 3-Phase
Chorus.
Parameters
J M03 : Multi03 (Flanger – 2-Tap Delay)
Function
This is a multi effector that is related to Flanger – 2-Tap
Delay.
Parameters
3: ER Level (Range: 0 to 127)
Adjusts the level of the initial reflection.
4: Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
0: Delay Time (Range: 0 to 127)
Adjusts the delay time.
1: Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
2: Feedback (Range: 0 to 127)
Adjusts the repeat of the delay.
3: High Damp (Range: 0 to 127)
Adjusts damping of the high-range delay
sound.
The smaller the value, the greater the damping
of high-range delay sound.
4: Ratio L (Range: 0 to 127)
Adjusts the delay time of the left channel.
Proportional to the value set for Delay Time.
5: Ratio R (Range: 0 to 127)
Adjusts the delay time of the right channel.
Proportional to the value set for Delay Time.
0: Chorus LFO Rate
1: Chorus LFO Depth
2: Chorus Feedback
3: Chorus Wet Level
4: Delay Time
5: Delay Wet Level
6: Delay Feedback
7: Delay High Damp
0: Chorus Rate 1
1: Chorus Depth 1
2: Chorus Rate 2
3: Chorus Depth 2
4: Chorus Wet Level
5: Delay Time
6: Delay Wet Level
7: Delay Feedback
0: Phaser Resonance
1: Phaser Manual
2: Phaser Rate
3: Phaser Depth
4: Chorus Rate 1
5: Chorus Depth 1
6: Chorus Rate 2
7: Chorus Depth 2
0: Flanger LFO Rate
1: Flanger LFO Depth
2: Flanger Feedback
3: Flanger Wet Level
4: Delay Time
705A-E-096A