Filter
Top Products
Using the SMF Player
E-78
1. Press the SMF PLAYER button to display the
file selection screen.
This causes the SMF player pointer to appear on
the display.
SMF are those whose file names end with the
extension “MID”. An error message appears at
this time if there are no SMF files currently in
Flash Memory.
2. Use the [ ] and [ ] CURSOR buttons or the
[
+
] and [–] buttons to select the file you want to
play.
The name of the currently selected file appears in
the text area of the display. The number area of
the display shows the size of the file in kilobytes.
3. Press the START/STOP button.
This starts playback of the selected file.
The number area shows the number of the part to
be played by hand.
You can use the TEMPO buttons to adjust the
tempo within the range of 30 to 255.
You can turn channels 1 through 16 on and off,
regardless of whether file playback is in progress
or stopped. For more information, see “Turning
Channels On and Off” on page E-40.
4. To stop file playback, press the START/STOP
button again.
The following procedure explains how to control the overall
volume of SMF data playback. You can adjust volume while
playback is stopped or ongoing.
1. Press the ACCOMP VOLUME button.
This causes the “SMF Vol.” indicator to appear on
the display, along with a value that indicates the
current SMF volume setting.
2. Use the [
+
] and [–] buttons or the number
buttons to adjust the SMF volume.
You can specify a setting in the range of 000
(minimum) to 127 (maximum).
Pressing [
+
] and [–] at the same time returns the
SMF volume setting to 100.
Note that this setting does not affect the volume
of the notes you play on the keyboard.
1. Select the file you want to play back.
Perform steps 1 through 2 under “To play back an
SMF” to select a file.
2. Press the [ ] CURSOR button to display a
screen for selecting the part you want to play on
the keyboard (play along part).
Use the [ ] and [ ] CURSOR buttons or the [
+
]
and [–] buttons to select the play along part.
Press the MIXER button to enter the Mixer Mode.
Turn off the channel that corresponds to the play
along part you selected above. See “Turning
Channels On and Off” on page E-40 for more
information. Performing this step turns off the
applicable part so you can play it on the keyboard
along with the rest of the SMF playback.
Entering the SMF Player Mode initializes all parts by
turning on all Mixer Mode channels.
After configuring Mixer Mode settings, press the
MIXER button or EXIT button to return to the
SMF Player Mode.
3. Press the [ ] CURSOR button to display the
playback mode selection screen.
Use the [ ] and [ ] CURSOR buttons or the [
+
]
and [–] buttons to select the playback mode.
You can select from among the following four
playback modes.
Playing Back an SMF
To play back an SMF
Adjusting SMF Playback Volume
Configuring Other Settings
To configure other settings
S1: One file, one time
SL: One file, repeat
A1: All files, one time
AL: All files, repeat
705A-E-080B