Filter
Top Products
23
Switching two images
Switching two images
Here’s how to switch the images being input to channel A and channel B.
Switching by Cut
1.
Set the memory dial (MEMORY) to 1.
To return the V4 state to the factory settings, turn the dial all the way to the left to select the #1
position.
2.
Select the input images for A and B.
From inputs 1 through 4, select the images that will be input to channel A and channel B. If the
same image is being input to both channels A and B, you will not notice any change when you
switch between channels. For example, if you have selected input image 1 for channel A, you
should choose from images 2 through 4 for channel B.
3.
Output either channel A or channel B.
Move the video fader all the way to the channel A or channel B position. Watch the final output on
your TV monitor or projector.
4.
Press a transformer button (TRANSFORMER).
If you have moved the video fader to the channel A position, press the channel B transformer
button. If you have moved the video fader to the channel B position, press the channel A
transformer button. Notice that the output displayed on your TV monitor or projector has changed.
or
V-4_e.book 23 ページ ２０１０年３月１１日 木曜日 午後１時５１分