Filter
Top Products
69
Using the V-4 in Presentation mode
Switching to Presentation mode
To switch from Normal mode to Presentation mode, turn off the power of the V-4. Then hold down
channel A input select buttons 1 and 4, and press the power button.
■
The function of the input selector
Presentation mode assumes that you will be combining two screens. Use the channel A input
selector to switch the background image. When you switch the background image in Presentation
mode, the currently selected transition effect will automatically be applied.
Use the channel B input selector to switch the image of the secondary screen, the screen overlays
on background.
■
The function of the BPM/CONTROL dial
Use the BPM/CONTROL dial to set the duration of the transition effect. If this dial is set to the far
left, the transition effect will have a duration of 0 seconds. If set to the far right, the transition effect
will have a duration of 4 seconds.
Presentations using two screens with Picture In Picture
Here’s how you can composite two screens, a technique frequently used in presentations.
1.
Switch the V-4 to Presentation mode.
Start up the V-4 in Presentation mode as described above.
If you want to start up in Normal mode and then switch to Presentation mode by making a menu
setting, choose the “Utility” menu item “V-4 Mode” and then select “Presentation.”
Once you switch to Presentation mode, that setting will be preserved. The next time you start up
the V-4, you can simply press the power button and the V-4 will start up in Presentation mode. If
you want to start up in Normal mode, hold down the channel A input select buttons 1 and 4 while
you press the power button.
V-4_e.book 69 ページ ２０１０年３月１１日 木曜日 午後１時５１分