Filter
Top Products
52
Editing the front panel assignments
3.
Select “Transformer.”
Use the cursor buttons to select “Transformer.” The memory dial number you select is displayed
following “Transformer.” If you have selected memory number 2, this will indicate [Mem2].
4.
Press the enter button (ENTER).
Press the enter button (located at the right of the cursor buttons) to make your selection. The
preview screen display will change to a screen where you can choose the parameter to be assigned.
5.
Select a pattern.
Select a pattern from the range of “01: none-none” to “36: Black-White.” If you select “01: none-
none,” the transformer buttons will have no effect; you will not be able to switch between images
A/B or fade to white/black by pressing these buttons. For details on the operation and times of
these parameters, refer to the menu list on p. 78.
6.
Return to the previous screen.
When you have finished making the settings, press the menu button to return to the previous
screen. Press the button twice to exit the menu screen and return to the previous screen.
V-4_e.book 52 ページ ２０１０年３月１１日 木曜日 午後１時５１分