Filter
Top Products
24
Switching two images
5.
Release the transformer button (TRANSFORMER)
Release your finger from the transformer button you pressed. Notice that the image displayed on
your TV monitor (or projector) has returned to the previous image.
Switching with dissolve
“Dissolve” is the effect of switching images using a gradual fade. You can create this effect by
mixing two images. If you stop mid-way during this change (i.e., with the video fader in the center
position), you will see a double-exposure of images A and B.
1.
Set the memory dial (MEMORY) to 1.
Turn the dial all the way to the left to select the 1 position.
2.
Select the input images for A and B.
From inputs 1 through 4, select the images that will be input to channel A and channel B. If the
same image is being input to both A and B channels, you will not notice any change when you
switch between channels. For example, if you have selected input image 1 for channel A, you
should choose from images 2 through 4 for channel B.
3.
Press the mix button (MIX).
Press the mix button (MIX) located above the video fader. The button will light.
4.
Move the video fader.
Move the video fader. On your TV monitor (or projector), notice how images A and B are mixed
while the change occurs.
Switching with Wipe
“Wipe” is the effect of switching between images by “wiping away” the previous image. If you
stop midway during this change (i.e., with the video fader in the center position), the two images
will both be partially displayed.
1.
Set the memory dial (MEMORY) to 1.
Turn the dial all the way to the left to select the 1 position.
V-4_e.book 24 ページ ２０１０年３月１１日 木曜日 午後１時５１分