Filter
Top Products
48
Editing the front panel assignments
Changing the assignments of the channel A and B effect
buttons (EFFECTS)
With the factory settings, effect buttons 1 through 4 of channels A and B are assigned the following
effects:
Channel A: 1 Strobe (STROBE)
2 Negative (NEGATIVE)
3 Colorize (COLORIZE)
4 Multi (MULTI)
Channel B: 1 Mirror (MIRROR)
2 Chroma key (CHROMA KEY)
3 Luminance key (LUMINANCE KEY)
4 Picture in picture (PinP)
1.
Turn the memory dial.
Turn the memory dial to the number (2 through 8) whose assignment you want to change.
2.
Choose the effect button whose assignment you want to change.
Press the effect button (channel A buttons 1-4, channel B buttons 1-4) whose assignment you want
to change. The effect will be applied.
3.
Press the menu button (MENU).
Press the menu button (MENU) located in the upper left of the panel. The settings edit menu will
appear on the TV screen connected to the preview output.
4.
Select either “Effects-A” or “Effects-B.”
Select “Effects-A” if you want to edit the channel A settings. Select “Effects-B” if you want to edit
the channel B settings. Use the cursor buttons to make your selection. The selection will blink. The
memory dial number you select is displayed following “Effects-A” or “Effects-B.” If you have
selected memory number 2, this will indicate [Mem2].
V-4_e.book 48 ページ ２０１０年３月１１日 木曜日 午後１時５１分