Filter
Top Products
Basic Operation
(continued)
24
* The “Mem2” through “Mem8” indications at the right of the menu items indicate that settings will be stored in
[MEMORY] knob locations 2–8. If you want to change settings, turn the [MEMORY] knob to select the memory
number 2–8 whose settings you want to change.
☞
“Storing the Operating Panel Settings” (p. 28)
fig.menu-preset.eps
* If “Mem 1” (memory number 1) is indicated, you won’t be able to change the
contents, since these are the factory preset settings. The menu will indicate “
✽✽
Preset
✽✽
”.
1
Press the [MENU] button to access the menu.
fig.menu1.eps
2
Use the [ ] [ ] buttons to select a menu item.
fig.menu2.eps
The [ ] [ ] buttons move the cursor up/down.
The menu item at the cursor will blink, indicated that it is selected.
3
Press the [ENTER] button to confirm your choice of menu item.
fig.menu3.eps
The selected menu item will be confirmed, and you’ll proceed to the next menu (a lower level).
To return to the previous menu (higher level), press the [MENU] button.
* If the menu level is deeper, repeat steps 2–3.
4
Use the [ ] [ ] buttons to edit the value.
5
Press the [MENU] button several times to close the menu.
Operating the Menu
While the menu is displayed, you can temporarily hide the menu by holding down the currently selected PREVIEW OUT
SELECT button.
V-8_e.book 24 ページ ２０１０年４月１６日 金曜日 午後５時１４分