Filter
Top Products
Using the V-8 with Other Equipment
(continued)
68
Here’s how to specify the channel on which MIDI messages will be received.
1
Press the [MENU] button to access the menu, and choose “MIDI Setup.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “MIDI Setup.”
Press the [ENTER] button to confirm your selection.
2
Use the [ ] [ ] buttons to choose “MIDI Rx Channel,” and press the [ENTER] button.
3
Use the [ ] [ ] buttons to specify the receive channel.
4
Press the [MENU] button several times to close the menu.
Here’s how to specify whether note messages from a MIDI keyboard or other device will be received.
1
Press the [MENU] button to access the menu, and choose “MIDI Setup.”
2
Use the [ ] [ ] buttons to choose “Note Mode,” and press the [ENTER] button.
3
Use the [ ] [ ] buttons to choose “49Keys Mode” or “Assign Mode.”
4
Press the [MENU] button several times to close the menu.
MIDI Message Reception Settings
Specifying the MIDI message receive channel
Turning note message reception on/off
Value Details
Off
Note messages will not be received.
49Keys Mode
INPUT SELECT 1–8 will be assigned to the white keys of the keyboard (C2–D4).
Assign Mode
INPUT SELECT 1–8 will be assigned to all keys of the keyboard.
You can specify the note range by setting the “MIDI Setup” menu items “Note Lower Key Assign”
(lowest note) and “Note Upper Key Assign” (highest note).
V-8_e.book 68 ページ ２０１０年４月１６日 金曜日 午後５時１４分