Edirol V-8 Music Mixer User Manual


 
Troubleshooting
(continued)
80
Problems with the image output
(continued)
Problem Cause and Action
The image changes automatically
Could the [BPM SYNC] button be lit?
If the [BPM SYNC] button is lit, the BPM Sync function will switch images automatically. Press
the [BPM SYNC] button to turn off its illumination.
Even when you set the video fader
all the way to the bus A or bus B
position, the output image is not
100%.
In some cases, the output image may not be 100% due to extended use or transportation.
Could you have installed the V-4CF crossfader (sold separately)?
Calibrate the video fader.
p. 77
Effects
Problem Cause and Action
Operating the [CONTROL] fader
does not change the effect
Have you selected an effect that has an “
” (asterisk) following the effect name?
The [CONTROL] fader can control effect settings only for an effect that has an “
” following the
effect name. The EFFECTS button of the effect that can be controlled will blink.
p. 42
Other
Problem Cause and Action
Menu settings are not saved
Could you have switched off power before closing a menu?
The settings in a menu are saved in the V-8’s internal memory when you close the menu. To
save the settings, edit the values as desired and then close the menu before you switch off the
power.
p. 25
Can’t change the settings in a
menu
Could the [MEMORY] knob be selecting memory number 1?
Select a memory number from 2 through 8.
Memory number 1 contains the factory preset settings. These are read-only, and cannot be
edited.
p. 28
Could memory protect be turned “On”?
Turn the “Utility” menu item “Memory Protect” setting “Off.”
p. 25
Can’t change the BPM
BPM display is blinking
Could you have used the TRANSITION buttons to select the transition effect “003: Fam
” or
“005: Nam
”?
Choose a transition effect other than “003: Fam
” or “005: Nam
.”
If you’ve selected “003: Fam
” or “005: Nam
,” the [BPM/CONTROL] knob will change the
FAM/NAM cross point.
p. 37
Use the [TAP] button to change the BPM.
p. 61
V-8_e.book 80 ページ 2010年4月16日 金曜日 午後5時14分