Filter
Top Products
67
Using the V-8 with Other Equipment
(continued)
Input/output
settings
Introduction Connections Basic operation Switching images Effects BPM sync External devices Video fader Appendices
Here’s how to specify whether MIDI messages will be transmitted when you operate the V-8’s buttons and knobs.
1
Turn the [MEMORY] knob to select the memory number 2–8 that you want to edit.
* Memory number 1 contains the factory preset settings (p. 28). These settings
cannot be modified.
2
Press the [MENU] button to access the menu, and choose “MIDI Setup.”
3
Use the [ ] [ ] buttons to choose “Panel Mode,” and press the [ENTER] button.
4
Use the [ ] [ ] buttons to select “Video+MidiOut” or “Midi Out Only.”
5
Press the [MENU] button several times to close the menu.
Turning MIDI message transmission on/off (Panel mode)
Value Details
Video+MidiOut
Video signals and MIDI messages will be output.
Video Only
Only video signals will be output.
Midi Out Only
Only MIDI messages will be output (Local Off).
If the “Midi Out Only” setting is selected, the following buttons and knobs can be operated. The other
buttons and knobs will not do anything. If you press a button that does nothing, it will not light.
[MENU] button, [ ] button, [ ] button, [ENTER] button, [TAP] button,
[BPM/CONTROL] knob, [MEMORY] knob, PREVIEW OUTPUT SELECT buttons,
[PC INPUT SELECT] switch, [WHITE/BLACK] switch
V-8_e.book 67 ページ ２０１０年４月１６日 金曜日 午後５時１４分