Filter
Top Products
58 KAWAI DIGITAL PIANO CA1200, CA1000
Reference Section
CHANGING THE T IME SIGNATURE (BEAT BUTTON)
The BEAT button is used to activate the metronome and select your desired
time signature. The CA piano has nine settings to choose from: 1/4, 2/4,
3/4, 4/4, 5/4, 6/8, 7/8, 9/8 and 12/8.
To change the time signature, press the BEAT button.
You will see the LED indicator turn on and hear the metronome begin
counting.
The LCD display shows the currently selected time
signature.
Use the VALUE buttons to select the desired time signature.
Press the BEAT button again to stop the metronome.
CHANGING THE METRONOME V OLUME (TEMPO & BEAT BUTTONS)
The volume of the metronome can be adjusted to any level you like.
Press the TEMPO and BEAT buttons simultaneously. The LED
displays the volume level of the metronome in numbers from 1 (soft)
to 10 (loud). The factory preset is 5.
The LCD display shows the current volume level.
To change the volume level, use the VALUE buttons while holding
down the TEMPO and BEAT buttons.
Press the both buttons simultaneously again to stop the metronome
◆ NOTE All the metronome settings will be reset to the factory preset values after
turning off the power unless you use the “User Memory” function to save
your current metronome settings.
For more information about the “User Memory” function please see page
50 in this section of the manual.
Metronome BEAT
= 4/4
Metronome VOLUME
= 5