Filter
Top Products
33
Sequencer
-: Not set automatically
Settings enclosed in parentheses ( ) are set automatically according to the parameters in the dialog box.
*1
: The specified setting for Analog, S/P DIF, or mLAN (“Input1” or “Input2”) will be made automatically.
*2
: The input source setting (“Input1” or “Input2”) specified in the “Source Audio” field of the dialog box will be made automat-
ically.
*3
: If “Source Audio” is Mono-1 this will be L-Mono, if Mono-2 it will be R-Mono, and if Stereo this will be Stereo.
*4
: If “Save to” is RAM, and “Convert to Program” is On.
*5
: If “From” is Audio Track 1, Audio 1 will be “SOLO: On.” If “From” is Audio Track 2, Audio 2 will be “SOLO: On.”
If “From” is Audio Track 1&2, Audio 1 and Audio 2 will both be “SOLO: On.” (Other tracks will be SOLO: Off.)
*6
: If “To” is Audio Track 1, valid audio tracks in “From” will be set to “Pan: L000”. If “To” is Audio Track 2, valid audio tracks
in “From” will be set to “Pan: R127”. If “To” is Audio Track 1&2, this will not be set automatically.
*7
: If “Source Audio” is Stereo, “Input 1” and “Input 2” will be set to L000 and R127 respectively. If “Source Audio” is Mono-1
or Mono-2, “Input 1” and “Input 2” will be set automatically to match “To.” If “To” is Audio Track 1 this will be L000, and if
Audio Track 2 this will be R127.
When you select and execute Bounce Audio Track, the Metronome Setup “Sound” setting (0–8b ☞PG p.58) will automati-
cally be turned Off.
Parameter 4. 2ch Mix to Disk 5. HD Audio Track REC 6. Bounce Audio Track
Input (Input Source) (Analog, S/P DIF, mLAN)
*1
(Source Audio)
*2
(Analog, S/P DIF, mLAN)
*1
Input1 Level 127 127 127
Pan L000 L000 (To)
*7
L000
BUS Select Off 1/2 Off
Send1 000 000 000
Send2 000 000 000
Input2 Level 127 127 127
Pan R127 R127 (To)
*7
R127
BUS Select Off 1/2 Off
Send1 000 000 000
Send2 000 000 000
Sampling Setup Source BUS L/R - -
Tr igger Sequencer START SW - -
Save to DISK - -
Mode Stereo - -
Sample Time: RAM - - -
Sample Time: DISK - - -
Recording Level [dB] –12.0 +0.0 +0.0
Select Bank & Smpl No.
(Page Menu Command)
Auto +12dB On - - -
Convert to Program - - -
Program - - -
MS ---
Orig.Key - - -
Seq.Event - - -
Tra ck ---
Recording Setup (Audio Track) Track Select - (To) (To)
Punch In - Off Off
Bounce - Off On
Source BUS - Indiv.1/2 L/R
Overwrite.WAV - - Off
Sel Dir/WAVE (Audio Track) for
Audio Track
(Page Menu Command)
WAVE File - No Assign -
Audio Track Audio1 SOLO - - (From)
*5
Pan - - (To)
*6
Audio2 SOLO - - (From)
*5
Pan - - (To)
*6