Filter
Top Products
43
Sequencer
“Copy From Program” has been added to the page menu
commands of the Sequencer P0: Play/REC page and related
pages.
0–1L: Copy From Program
Copies the settings from a specific program to a track or
effect in the currently selected song.
1 Select “Copy From Program” to open the dialog box.
2 Use “Program” to select the copy-source program.
3 If you check “with Effects,” the insert effect, master
effect, and master EQ settings will also be copied.
The “Control Channel” of each effect will be set to the
MIDI channel of the copy-destination track.
About the “BUS Select (IFX/Indiv.Out BUS Select)” (8–
1(2)b ☞PG p.83) setting
• Regardless of the “with Effects” setting, “BUS Select”
will be set to DKit if the “Use DKit Setting” of the
copy-source program is checked. In conjunction with
this, the “DrumKit IFX Patch” (☞PG p.46) setting will
be reset to the default state.
• If “with Effects” is checked, the “BUS Select” setting
of the copy-source program will be copied. If the
“BUS Select” of any track (other than the copy-
destination track) is set to IFX1–IFX5, the “BUS
Select” setting for that track will automatically be set
to L/R.
• If “with Effects” is unchecked, then the copy-source
“BUS Select” setting will be ignored. If the copy-
destination track “BUS Select” are was set to IFX1–
IFX5, it will automatically be set to L/R.
4 If “with Arpeggiator” is checked, the arpeggiator set-
tings of the copy-source program will be copied to the
arpeggiator you specify in step
6. In conjunction with
this, check “Arpeggiator Run” for the arpeggiator you
specify in step
6, and set “Arpeggiator Assign” of the
copy-destination track to the arpeggiator you specify in
step
6.
5 In the “To” field, specify the copy-destination track.
The parameters of each track will be initialized. “Pro-
gram Select” (0–1(2)c will be set to the copy-source pro-
gram.
• “MIDI Channel” and “Bank Select (When
Status=EX2)” (2–1(2)a ☞PG p.63) settings will not
change.
• “Status” (2–1(2)a ☞PG p.62) will automatically be set
to INT.
• If the copy-source is an INT-F bank program, the
“Voice Allocation Reserve” (☞EM p.47) setting of
the copy-destination track will be automatically set to
6, and the “Voice Allocation Reserve” of other tracks
will be set to 0. “MOSS BUS Select Reference”
(☞EM p.47) will be automatically set to the copy-
destination track.
• The 1–4: Controller (☞PG p.12) settings of the copy-
source program will be copied.
6 Use the “Arpeggiator” field to specify the copy-destina-
tion arpeggiator.
7 Press the OK button to execute the copy. If you decide
not to execute, press the Cancel button.
Add the contents of “Copy From Program” to the “Parameter
Guide” Sequencer P0: Play/REC page menu commands
(
☞
PG p.52).
A “Swing” parameter has been added to the Sequencer P5:
Track Edit page menu command “Quantize” (☞PG p.73).
5–1N: Quantize
Swing [–300%...+300%]
This adds a feeling of “swing” to the rhythm. For example, it
can be used to transform a square 16-beat into a subtle shuf-
fle groove.
With settings other than 0%, the location of even-numbered
notes will be adjusted by the amount specified in “Resolu-
tion” to apply a swing feel to the rhythm.
With a setting of +100%, the notes will be moved 1/3 of the
distance of the specified “Resolution.” With a setting of
+300%, even-numbered notes will be moved all the way to
the location of the next odd-numbered beat.
Add the contents of the “Swing” parameter to “Parameter
Guide” 5–1N: Quantize (
☞
PG p.73).
Copy From Program
0–1L
Swing Quantize Parameter
When “Resolution” =
“Swing” = 0%
beat
“Swing” = +100%
“Swing” = –100%
“Swing” = +200%
“Swing” = +300%
+100%
0%
+200%
+300%
–100%
1234