Filter
Top Products
|
20
Axiom Pro User Guide
Loading Patches:
To load a saved patch:
1. Press the Load button. The button becomes illuminated and the Load page is displayed on the LCD.
2. Turn Encoder knob E5 to select the patch that you would like to load.
✓ TIP: Axiom Pro 49/61 users can also use the +/- buttons or enter the patch number using the
numerical keypad.
3. By default, all of the controller groups of Axiom Pro (i.e., the encoder knobs, drum
pads, etc.) will be loaded from the saved patch. If you would like to load a new
patch but keep the current settings of a group:
a. Axiom Pro 49/61 users: Press the “N,” “S,” “E,” and “P” buttons
3
to uncheck
the Number, Slider, Encoder, and Pad groups. Axiom Pro 25 users: Press
the Record and Play buttons to uncheck the encoder and pad groups,
respectively.
b. Use Soft Keys 2-3 to uncheck the Keyboard and Transport Control groups,
respectively
4. Press Soft Key 4 (Load) to load the patch and return to Performance mode.
Soft Key 1 (Exit) can be pressed at any time to exit this page without loading a
patch.
3
NOTE: Since Axiom Pro 25 does not feature sliders (“S”) or a numerical keypad (“N”), these groups will not appear on
the Load Page.
When a new Axiom Pro
patch is recalled, the Program
change and Bank LSB/
MSB settings of the newly
loaded patch are also
recalled. If you would like to
load a new Axiom Pro patch
without transmitting Program
Change and Bank LSB/MSB
messages, use Soft-Key 2
to ensure that the keyboard
group is not checked.