Filter
Top Products
|
42
Axiom Pro User Guide
Edit Mode > Group (Numerical Keypad)
press 3 press N
Axiom Pro 49/61
Press the Edit Mode button, select option number 3 and then press “N” to open the Numerical
Keypad Group page.
The Edit Mode > Group (Numerical Keypad) page displays parameters relating to the Numerical
Keypad.
You can select one of the other groups of controls for editing by pressing the “N”
9
“S”
9
“E” and
“P” group buttons on Axiom Pro 49/61 or the “Play” and “Record” buttons to select the encoder
and pad groups on Axiom Pro 25.
Note that this section of the User Guide covers the Numerical Keypad group (the other groups are
covered in the preceding sections of this guide).
Parameter: Name
Value Range: (varies)
This parameter lets you name the keypad group. Note that this name only appears within the
Axiom Pro controller and does not affect your audio application in any way.
To learn more about entering or changing Name parameters, see the box titled “Editing Name
Parameters” in the “Edit Mode > Control” section.
Parameter: Channel
Value Range: Global, 1-16, Zone 1-4
This parameter sets the MIDI output channel of the numerical keypad group. The parameter can be
set in the following ways:
•Global This sets the “group” MIDI channel for the numerical keypad to the same channel
as specified on the Edit > Global page.
•1-16 This sets the “group” MIDI channel for the numerical keypad to a channel between
1 and 16.
•Zone 1-4 This sets the “group” MIDI channel for the numerical keypad to the same channel
as used by the selected keyboard zone (1 through 4). (see Edit Mode > Zones >
Data to learn how to set these output channels).
9
Only available on Axiom Pro 49/61
✓ Tip:
You can directly
access this page
by first pressing a
button on the keypad
group, pressing the
Edit Mode button
and selecting option
number 3.