Filter
Top Products
|
43
Axiom Pro User Guide
Edit Mode > Zones
press 4
The Edit Mode > Zones page lets you configure the parameters for each of the four zones contained within Axiom Pro.
To select the range of a keyboard zone:
1. Use Soft Keys 2-3 (or Encoder Knob E1) to select the zone you would like to edit.
2. Use Encoder Knob E5 to set the lowest note contained in your range.
10
3. Use Encoder Knob E6 to set the highest note contained in your range.
10
✓ TIP: Keyboard zone ranges can also be set by pressing the lowest and highest notes of the range on the
keyboard itself.
10
4. Press Soft Key 4 (Data) to access additional parameters relating to the selected zone (the parameters contained on the
“Data” sub-menu are covered in the following section of this guide.)
To activate or deactivate a zone:
The radio buttons on the left edge of the screen indicate which zones are currently active (active zones have filled in buttons
while inactive zones are not filled in). Use Slider Buttons “1” through “4” (“Loop,” “Rewind,” “Fast Forward,” and “Stop”
buttons on Axiom Pro 25), to activate a corresponding zone. To activate more than one zone, press and hold multiple buttons
at the same time.
To deactivate a zone, press that zone’s corresponding Slider button again.
10
Notethatwhenselectingkeyboardzones,octaveshiftandtranspositionareignored(i.e.,AxiomProisassumedtobe
in its default transposition/octave-shift range).