|
31
Axiom Pro User Guide
About the “Channel” sub-parameter:
This parameter sets the MIDI output channel of the selected control. The
parameter can be set in the following ways:
•Global Your selected control will transmit on the global MIDI channel
as specified on the Edit > Global page.
•1-16 Your selected control will transmit on a MIDI channel between
1 and 16.
•Zone 1-4 Your selected control will transmit on the same MIDI channel used by the chosen keyboard zone (1 through 4).
(see Edit Mode > Zones > Data to learn how to set these output channels).
•Group Your selected control will transmit on the same MIDI channel as set for its associated group of controls
(e.g. encoder group). See Edit > Group to learn how to set a MIDI channel for a group of controls.
✓ NOTE: Axiom Pro allows you to assign any control to any MIDI channel through the
Edit Mode > Control menu. However, please note that certain MIDI devices reserve
channel 10 for drums and percussion. Appendix E6 features a General MIDI drum
map table to show you how drum sounds are commonly assigned to the keys of
controllers.Pleaserefertoyourdevice’sdocumentationtolearnmoreaboutthis.
