Filter
Top Products
|
40
Axiom Pro User Guide
Edit Mode > Group (Slider)
press Spress 3
Axiom Pro 49/61
Press the Edit Mode button, select option number 3 and then press “S” to open the Slider Group
page.
The Edit Mode > Group (Slider) page displays parameters relating to the Sliders.
You can select one of the other groups of controls for editing by pressing the “N” “S” “E” and “P”
group buttons on Axiom Pro 49/61 or the “Play” and “Record” buttons to select the encoder and
pad groups on Axiom Pro 25.
Note that this section of the User Guide covers the Slider group (the other groups are covered in
the preceding and following sections of this guide).
Parameter: Name
Value Range: (varies)
This parameter lets you name the slider group. Note that this name only appears within the
Axiom Pro controller and does not affect your audio application in any way.
To learn more about entering or changing Name parameters, see the box titled “Editing Name
Parameters” in the “Edit Mode > Control” section.
Parameter: Channel
Value Range: Global, 1-16, Zone 1-4
This parameter sets the MIDI output channel of the slider group. The parameter can be set in the
following ways:
• Global This sets the “group” MIDI channel for the sliders to the same channel as specified
on the Edit > Global page.
• 1-16 This sets the “group” MIDI channel for the sliders to a channel between 1 and 16.
• Zone 1-4 This sets the “group” MIDI channel for the sliders to the same channel as used by
the selected keyboard zone (1 through 4). See Edit Mode > Zones > Data to learn
how to set these output channels.
✓ Tip:
You can directly
access this page by
first moving any of
the sliders, pressing
the Edit Mode button
and selecting option
number 3.