Filter
Top Products
Type Control Type MIDI Ch. Param. A Param B Param C Param D Description*
Master Pan - Min (0-127) Max (0-127) - Entry (DEC, HEX)
Master Pan - LSB (0-127) MSB (0-127) - Entry (DEC, HEX)
Coarse Tune - Min (0-127) Max (0-127) - Entry (DEC, HEX)
Coarse Tune - LSB (0-127) MSB (0-127) - Entry (DEC, HEX)
Fine Tune - Min (0-127) Max (0-127) - Entry (DEC, HEX)
Fine Tune - LSB (0-127) MSB (0-127) - Entry (DEC, HEX)
Chorus Mod rate - Value (0-127) - - Entry (DEC, HEX)
Chorus Mod Depth - Value (0-127) - - Entry (DEC, HEX)
Feedback - Level (0-127) - - Entry (DEC, HEX)
Send to Reverb - Level (0-127) - - Entry (DEC, HEX)
Pitch Bend 1-16, Zone 1-4, Group, Global Min (0-127) Max (0-127) - Entry (DEC, HEX)
Pitch Bend 1-16, Zone 1-4, Group, Global LSB (0-127) MSB (0-127) - Entry (DEC, HEX)
Kybd. Velocity - Min (0-127) Max (0-127) - Entry (DEC, HEX) This parameter functions similarly to the xed velocity setting found on the
Edit Mode > Global page. However, this parameter lets your selected control
determine the velocity of the keys in real-time (e.g. during a performance).
Kybd. Velocity - Velocity (0-127) - - Entry (DEC, HEX) This parameter functions similarly to the xed velocity setting found on the
Edit Mode > Global page. However, this parameter lets your selected control
determine the velocity of the keys in real-time (e.g. during a performance).
Pad Velocity - Min (0-127) Max (0-127) - Entry (DEC, HEX) This parameter functions similarly to the xed velocity setting found on the
Edit Mode > Group (Pads) page. However, this parameter lets your selected control
determine the velocity of the drum pads in real-time (e.g. during a performance).
Pad Velocity - Velocity (0-127) - - Entry (DEC, HEX) This parameter functions similarly to the xed velocity setting found on the
Edit Mode > Group (Pads) page. However, this parameter lets your selected control
determine the velocity of the drum pads in real-time (e.g. during a performance).
Control Assignment List
|
page 2
* NOTE: This column only describes the “non-standard” parameters and their associated sub-parameters within Axiom Pro (such as “Note OnOff Toggle” or “Rel. Bin Offset”). Standardized MIDI parameters (such as Continuous Controllers “CC” or “Master Volume”) are not described in this
guide. If you require more information, please note that standard MIDI parameters are well documented on the Internet as well as in a number books about the MIDI protocol. To learn more about these standard parameters, please refer to one of these books or websites.
Control Type Key
= Pads Group
= Encoders Group
= Numerical Keypad Group, Sustain Pedal, Function Keys,
Transport Controls
= Slider Group, Pitch Bend, Keyboard Aftertouch, Modulation
Wheel, Expression Input