Filter
Top Products
|
34
Axiom Pro User Guide
✓ Tip:
You can directly
access this page by
first tapping any of
the pads, pressing
the Edit Mode button
and selecting option
number 3.
Edit Mode > Group (Pad)
press P
Axiom Pro 49/61
press 3
or
press record
Axiom Pro 25
Axiom Pro 49/61
Axiom Pro 25
Press the Edit Mode button, select option number 3 and then press “P” (Axiom Pro 25: press the
“Record” button) to open the Pad Group page.
The Edit Mode > Group (Pad) page displays parameters relating to the drum pads.
You can select one of the other groups of controls for editing by pressing the “N” “S” “E” and “P”
group buttons on Axiom Pro 49/61. On Axiom Pro 25, use the “Play” and “Record” buttons to
select the encoder and pad groups, respectively.
6
Note that this section of the User Guide covers the Pad group (the other groups are covered in the
following sections of this guide).
Parameter: Name
Value Range: (varies)
This parameter lets you name the group of pads. Note that this name only appears within the
Axiom Pro controller and does not affect your audio application in any way.
To learn more about entering or changing Name parameters, see the box titled “Editing Name
Parameters” in the “Edit Mode > Control” section.
Parameter: Channel
Value Range: Global, 1-16, Zone 1-4
This parameter sets the MIDI output channel of the drum pads group. The parameter can be set in
the following ways:
•Global This sets the “group” MIDI channel for the drum pads to the same channel as specified
on the Edit > Global page.
•1-16 This sets the “group” MIDI channel for the drum pads to a channel between 1 and 16.
•Zone 1-4 This sets the “group” MIDI channel for the drum pads to the same channel as used
by the selected keyboard zone (1 through 4). See Edit Mode > Zones > Data to
learn how to set these output channels.
6
Axiom Pro 25 does not have sliders or a numerical keypad, and therefore does not feature slider or numerical keypad groups.