Filter
Top Products
E-101
5
Use the [̇] and [̈] CURSOR buttons to select the
type of the file you want to rename.
6
Press the [̄] CURSOR button to display the file
name selection screen.
7
Use the [̇] and [̈] CURSOR buttons or [+] and
[–] buttons to select the name of the file you want
to rename.
8
Press the [̄] CURSOR button to advance to the
file name input screen.
• Use the [+] and [–] buttons to scroll through letters at
the current cursor location. See the page E-103 for
information about inputting text.
• Use the [̇] and [̈] CURSOR buttons to move the
cursor left and right.
9
After inputting the file name, press the [̄] CURSOR
button.
• This will display a confirmation message asking
whether you really want to chance the name.
0
Press the YES button to change the file name.
• This will cause the message “Pls Wait” to appear on
the display to indicate that a card access operation is
being performed. Never try to perform any other
operation on the keyboard while the card is being
accessed. The message “Complete” will appear on the
display after renaming is complete. After a few
seconds, the message will be replaced by the file name
selection screen.
• If you do not want to continue with file renaming,
press the EXIT button or the NO button in response
to the above confirmation message. This will return
you to the user area selection screen in step 5.
A
After you are finished performing the rename
operation, press the DISK/CARD button (CARD
button on the WK-3000) to exit the Card Mode.
Deleting a File
You can perform the procedure in this section to delete a file
from external storage media.
IMPORTANT!
• Note that the file delete operation cannot be undone.
Make sure that you no longer need data before you
delete it.
PREPARATION
• SmartMedia Card
• Insert the SmartMedia card that contains the file you
want to delete into the keyboard’s card slot. Make sure
that the sticker is removed from the card’s write area,
which enables writing.
• Floppy Diskette (WK-3500 Only)
• Insert the floppy diskette that contains the file you want
to delete into the keyboard’s floppy disk drive. Make
sure that the diskette’s write protect hole is closed,
which enables writing.
To delete a file from external storage media
1
What you should do first depends on the type of
external storage media you are using.
• SmartMedia Card
On the WK-3500 press the DISK/CARD button twice.
On the WK-3000, press the CARD button once.
• This causes a pointer to appear next to the DISK/
CARD or CARD on the display, and also displays
“Card” in the display’s text area.
• Floppy Diskette (WK-3500 Only)
Press the DISK/CARD button.
• This causes a pointer to appear next to the DISK/
CARD on the display, and also displays “Disk” in
the display’s text area.
2
Press the [̄] CURSOR button to display the Card
Mode (or Disk Mode) menu.
3
Use the [̇] and [̈] CURSOR buttons to display
the “Delete” screen.
4
Press the [̄] CURSOR button to advance to the
file type selection screen.
5
Use the [̇] and [̈] CURSOR buttons to select the
type of the file you want to delete.
6
Press the [̄] CURSOR button to display the file
name selection screen.
Saving Data
735A-E-103A
WK3000_e_89-105.p65 03.4.8, 11:52101