Filter
Top Products
E-56
■
Vibrato Waveform (Range: See below.)
Specifies the vibrato waveform.
■
Vibrato Delay (Range: –64 to 00 to +63)
Specifies the amount of time before vibrato starts.
■
Vibrato Rate (Range: –64 to 00 to +63)
Rate (speed) of the vibrato effect
■
Vibrato Depth (Range: –64 to 00 to +63)
Depth of the vibrato effect
■
Octave Shift (Range: –2 to 0 to +2)
Up/down octave shift
■
Level (Range: 000 to 127)
This parameter controls the overall volume of the tone. The
greater the value, the greater the volume. Setting a level of
zero means that the tone does not sound at all.
Vib.T
y
p
e
Value Meaning Waveform
Sin Sine Wave
tri Triangle Wave
SAU Sawtooth Wave
Sqr Square Wave
y
V i bDe l a
Vib.R eat
VibD te
p
h
Oc t Sh i f t
Level
Synthesizer Mode
735A-E-058A
■
Touch Sensitivity (Range: –64 to 00 to +63)
This parameter controls changes in the volume of the tone in
accordance with the pressure applied to the keyboard keys. A
greater positive value increases the volume of the output as
pressure increases, while a negative value decreases volume
with increased keyboard pressure. A setting of zero specifies
no change in output volume in accordance with keyboard
pressure.
■
Reverb Send (Range: 000 to 127)
This parameter adjusts reverb.
■
Chorus Send (Range: 000 to 127)
This parameter adjusts chorus.
■
DSP Line (Settings: on, oFF)
This parameter controls whether or not the DSP effect is used.
Tc hSe ens
Rv b Send
Ch o Se n d
DSP L i ne
WK3000_e_47-58.p65 03.4.8, 11:5256