Filter
Top Products
E-28
Using the Drawbar Organ Mode
735A-E-030A
To select a drawbar organ tone
1
Find the drawbar organ tone you want to use in
the tone list and note its tone number.
2
Press the DRAWBAR ORGAN button.
• This causes the drawbar organ tone selection screen
to appear.
3
Use the number buttons to input the three digit tone
number for the tone you want to select.
NOTE
• Always input all three digits for the tone number,
including leading zeros (if any).
• You can also increment the displayed tone number by
pressing [+] and decrement it by pressing [–].
To edit a drawbar organ tone
1
Select the drawbar organ tone (000 to 049, 100 to
199) you want to edit.
2
Use the [̇] and [̈] CURSOR buttons to display
the drawbar organ tone editing screen. Select the
parameter whose setting you want to change.
Example: Selecting the “Ft16’” parameter
• There are a total of 13 parameters. You can use the
[̇] and [̈ ] CURSOR buttons to cycle through them.
See “Parameter Details” on page E-29 for more
information.
• While the “More?” screen is on the display, you can
advance to the synthesizer and DSP effect editing
screens by pressing the [̄] CURSOR button or the
[+] button.
3
Use the [̆] and [̄] CURSOR buttons or the [+]
and [–] buttons to change the setting of the currently
displayed parameter.
• You can also change a parameter setting by entering
a value with the number buttons.
• You can monitor the changes in a tone by playing
notes on the keyboard as you adjust parameter
settings.
NOTE
• Selecting a different tone after you edit parameters
replaces parameter settings with those of the newly
selected tone.
• If you have drawbar organ tones assigned to more than
one channel, changing the drawbar organ setting for one
of the channels causes the same setting to be applied
to all of the other channels as well.
• See “To save an edited drawbar organ tone” on page E-
30 for information about saving your edits.
Ro c kOr
g
1
Tone Number Tone Name
Ft16’
Parameter Setting Parameter Name
DRAWBAR ORGAN
Number buttons
[+]
/
[–]
CURSOR
WK3000_e_26-37.p65 03.4.8, 11:5128