Filter
Top Products
E-60
To Save a Setup in Registration
Memory
1
Select a tone and rhythm, and otherwise set up the
keyboard the way you want it.
• See “Registration Memory Settings” on page E-59 for
details on what data is stored in the registration
memory.
2
Use the BANK button or the number buttons to
select the bank you want.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the display
returns to the contents in step 1, above.
• Bank 1 selected.
3
While holding down the STORE button, press a
REGISTRATION button (1 to 4).
• The following display appears when you press the 2
button.
4
Release the STORE and REGISTRATION buttons.
NOTE
• The setup is saved as soon as you press a
REGISTRATION button in step 3, above.
Registration Memory
Ban k
Store
To Recall a Setup from
Registration Memory
1
Use the BANK button or the number buttons to
select the bank.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the keyboard
automatically clears the registration memory recall
screen.
2
Press the REGISTRATION button (1 to 4) or number
buttons for the area whose setup you want to recall.
• The setup name along with the message “Recall”
appears on the display.
NOTE
• If you press a REGISTRATION button without using the
BANK button to select a bank first, the last bank number
selected is used.
Ban k
Recal l
735A-E-062A
Number buttons
BANK
STOREREGISTRATION
WK3000_e_59-60.p65 03.4.8, 11:5260