Filter
Top Products
E-48
Mixer Function
735A-E-050A
Using the Parameter Edit Mode
Editing the Parameters for Channels
1 through 16
In the Parameter Edit Mode, you can change the settings of
ten different parameters (including tone, volume, and pan
pot) for the channel you selected on the Mixer screen.
To change parameters
1
Press the MIXER button.
• This causes a pointer to appear on the display next to
MIXER.
2
Press a CHANNEL button (1 through 16) to select a
channel.
• Use the [̇] and [
̈] CURSOR buttons to change
between channels.
3
Use [̆] and [
̄] CURSOR to select the parameter
whose setting you want to change.
Example: Select volume setting by displaying “Volume”.
• Each press of [̆] or [̄] CURSOR cycles through the
parameters.
• You can use the [̇] and [
̈] CURSOR buttons to
change to another channel at any time during this
procedure.
Indicates channel volume of 127
V o l ume
V o l ume
4
Use the number buttons or [+] and [–] to change
the parameter setting.
Example: Change the setting to “060”.
• Pressing the MIXER or EXIT button exits the
parameter edit mode.
Editing DSP Channel Parameters
1
Press the CHANNEL(DSP) button.
• You can also select the DSP channel by pressing by
pressing the [̈] CURSOR button Channel 16 is
selected.
• This selects the DSP channel.
• Pressing the [̇] CURSOR button while the DSP
channel is selected returns to Channel 16.
CHANNELMIXER
CURSOR
Number buttons
[+]
/
[–]
WK3000_e_47-58.p65 03.4.8, 11:5148