Filter
Top Products
A-24
1 : Time (Range: 0 to 127)
Adjusts the reverb time.
2 : High Damp (Range: 0 to 127)
Adjusts damping of the high-range reverb
sound.
The smaller the value, the greater the damp-
ing of high-range reverb sound.
3 : ER Level (Range: 0 to 127)
Adjusts the level of the initial reflection.
4 : Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
28 :2-Tap Delay
■
Function
This is left/right 2-tap delay.
■
Parameters
0 : Delay Time (Range: 0 to 127)
Adjusts the delay time.
1 : Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
2 : Feedback (Range: 0 to 127)
Adjusts the repeat of the delay.
3 : High Damp (Range: 0 to 127)
Adjusts damping of the high-range delay
sound.
The smaller the value, the greater the damp-
ing of high-range delay sound.
4 : Ratio L (Range: 0 to 127)
Adjusts the delay time of the left channel.
Proportional to the value set for Delay Time.
5 : Ratio R (Range: 0 to 127)
Adjusts the delay time of the right channel.
Proportional to the value set for Delay Time.
★ The following “Multi” algorithms ar
e used in com-
bination with the algorithms described above. Pa-
rameters are shard by both types of algorithms.
M00 : Multi00 (Sin 2-Phase Chorus
– 2-T
ap
Delay)
■
Function
This is a multi effector that is related to Sin 2-
Phase Chorus - 2-Tap Delay.
■
Parameters
0 : Chorus LFO Rate
1 : Chorus LFO Depth
2 : Chorus Feedback
3 : Chorus Wet Level
4 : Delay Time
5 : Delay Wet Level
6 : Delay Feedback
7 : Delay High Damp
M01 : Multi01 (3-Phase Chorus
– 3-T
ap De-
lay)
■
Function
This is a multi effector that is related to 3-Phase
Chorus - 3-Tap Delay.
■
Parameters
0 : Chorus Rate 1
1 : Chorus Depth 1
2 : Chorus Rate 2
3 : Chorus Depth 2
4 : Chorus Wet Level
5 : Delay Time
6 : Delay Wet Level
7 : Delay Feedback
M02 : Multi02 (Phaser
– 3-Phase Chorus)
■
Function
This is a multi effector that is related to Phaser
- 3-Phase Chorus.
■
Parameters
0 : Phaser Resonance
1 : Phaser Manual
2 : Phaser Rate
3 : Phaser Depth
4 : Chorus Rate 1
5 : Chorus Depth 1
6 : Chorus Rate 2
7 : Chorus Depth 2
M03 : Multi03 (Flanger
– 2-T
ap Delay)
■
Function
This is a multi effector that is related to Flanger
- 2-Tap Delay.
■
Parameters
0 : Flanger LFO Rate
1 : Flanger LFO Depth
2 : Flanger Feedback
3 : Flanger Wet Level
4 : Delay Time
5 : Delay Wet Level
6 : Delay Feedback
7 : Delay High Damp
M04 : Multi04 (Stereo Phaser
– Stereo Delay
1)
■
Function
This is a multi effector that is related to Stereo
Phaser - Stereo Delay 1.
■
Parameters
0 : Phaser Resonance
1 : Phaser Manual
2 : Phaser Rate
3 : Phaser Depth
4 : Phaser Wet Level
5 : Delay Time
Appendix
735A-E-138A
WK3000_e_A-19-31.p65 03.4.8, 11:5324