Filter
Top Products
Europa Firmware Update Utility
Europa Firmware Update UtilityEuropa Firmware Update Utility
Europa Firmware Update Utility
Europa User Guide
Europa User GuideEuropa User Guide
Europa User Guide
Page 52
Step 3: Update the Jupiter 6
Step 3: Update the Jupiter 6Step 3: Update the Jupiter 6
Step 3: Update the Jupiter 6
Once the update file has been selected and verified good, the “Update” button becomes active. If the
Jupiter 6’s Europa image is bad, the serial # and Europa version # fields will be blank. Notice that
Europa’s serial number is shown as well as the version of the currently installed Europa image:
To update Europa, click “Update”. A small progress dialog box will pop up:
The entire update process will take between 15 and 60 seconds to complete depending upon the image
size, the number of other programs/tasks running, and the speed of the platform. The LEDs will
shimmer during updating – this is normal! Timeouts or other errors will be reported if the update is not
successful. If the update is successful, the following is shown:
Click “OK”, and then click on “Exit” or the “X” in the upper right hand corner of the dialog box to exit.
Update complete! The serial # and Europa Version is updated at the end of the update to reflect the new
version.