Filter
Top Products
46
Performing (Play Mode)
Normally, note messages are transmitted with a velocity value that corresponds to the force with which you play the keyboard.
If desired, the A-PRO can also transmit notes with a fixed velocity value, regardless of your playing dynamics.
This is convenient when you want to record notes into your DAW software at a fixed velocity.
You can also adjust the sensitivity of the keyboard and change the velocity curve
(the way in which velocity responds to your dynamics).
The system “FUNCTION” setting “KEY VELOCITY” lets you specify a fixed velocity.
* You can use the following method, or refer to “[VALUE] knob Settings” (p. 68).
If “KEY VELOCITY” is assigned to the [VALUE] knob, you can also use the following
procedure to specify the velocity.
1 Use the [ ] [ ] buttons to move the cursor to “USER ASSIGN” in
the display.
The display will indicate the velocity value that was transmitted most recently.
2 Use the [VALUE] knob to specify the desired velocity value
(TOUCH, 1–127).
fig.lcd-keyvelocity.eps
If the display indicates “TOUCH,” the
transmitted velocity value will correspond
to the force with which you play the
keyboard.
Refer to the system setting “KEYBOARD VELOCITY CURVE” (p. 60).
Adjusting the Playing Dynamics (VELOCITY)
Specifying a Fixed Velocity (KEY VELOCITY) Changing the Keyboard Touch (VELOCITY CURVE)
[VALUE] knob assignment
Here’s how to assign “KEY VELOCITY” as the “FUNCTION.”
1. Press the [ACT] button and [] button simultaneously to enter Edit
mode.
2. Turn the [VALUE] knob until “FUNCTION” appears in the display.
Press the [ENTER] button.
fig.lcd-keyvelocity.eps
3. Use the [VALUE] knob to select “KEY
VELOCITY,” and then press the [ENTER]
button.
This completes the settings and takes you back to Play mode.
For more about FUNCTION, refer to “FUNCTION” (p. 68).
A-300_500_800C_e.book 46 ページ ２０１０年２月２２日 月曜日 午後９時１３分