Filter
Top Products
65
System Settings (EDIT Mode)
Here’s how to turn ADVANCED DRIVER MODE on/off.
We recommend that you normally leave this On.
If you change this setting, the new setting will take force after you’ve turned the power
off, then on again.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “USB SETTING,” and press the
[ENTER] button.
3 Use the [VALUE] knob to select “USB ADV DRIVER,” and press the
[ENTER] button.
4 Use the [VALUE] knob to specify the USB MIDI driver type.
* FPT = Fast Processing Technology of MIDI Transmission
This takes full advantage of the USB bandwidth to process MIDI data in an optimal
way at all times, depending on the amount of MIDI data to be transmitted.
5 Press the [ENTER] button to return to Play mode.
USB-related Settings
ADVANCED DRIVER MODE
Setting Explanation
OFF
Choose this if you want to use the standard MIDI driver provided by your
operating system (p. 73). (Standard driver mode)
ON
This setting uses FPT technology to allow high-speed MIDI communica-
tion. Choose this if you’ve installed the driver as described in p. 12 and
following.
A-300_500_800C_e.book 65 ページ ２０１０年２月２２日 月曜日 午後９時１３分