Filter
Top Products
69
System Settings (EDIT Mode)
Turn this On when using certain applications (such as Pro Tools LE). If this is On, the
message “90 00 7F” will be transmitted to “A-PRO 2” at intervals of approximately 500
ms.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-HACTVTY.eps
3 Use the [VALUE] knob to choose
“H-ACTVTY ON/OFF,” and press the
[ENTER] button.
fig.lcd-HACTVTY1.eps
4 Use the [VALUE] knob to specify
either “ON” or “OFF.”
5 Press the [ENTER] button.
This specifies the function of the [HOLD] button.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-L9FUNC.eps
3 Use the [VALUE] knob to choose “L9
FUNCTION,” and press the [ENTER]
button.
fig.lcd-L9FUNC1.eps
4 Use the [VALUE] knob to specify the
function of [HOLD] button.
5 Press the [ENTER] button.
Other Settings
H-ACTIVITY ON/OFF L9 FUNCTION
Value Setting Explanation
1 L9 Any desired MIDI message can be assigned to the button.
2 HOLD
The button will allow the sound to continue even after you
take your hand off the pad.
3 VLINK The button will operate as a V-LINK ON/OFF button.
A-300_500_800C_e.book 69 ページ ２０１０年２月２２日 月曜日 午後９時１３分