Filter
Top Products
Menu options
68
r
Backing Keyboard BK-5
The following table shows the “Lyrics Settings”
parameters.
Utility
The “Utility” parameters are found on the display
page that can be selected using [MENU] button‰
“Global” ‰ “Utility”.
The following table shows the utility parameters.
Parameter Setting Explanation
Background
Mode
Color, Logo,
User
Color: The back-
ground is empty but
uses the selected color
(see below).
Logo: The BK-5’s logo
is shown as back-
ground.
User: The BK-5 uses
the selected .JPG pic-
ture as background.
See xx.
Background
Color
1~8 Choose the back-
ground color.
Highlight Color 1~8 Choose the highlight
color.
Row Displaying 2, 4 Allows you to specify
the number of lines to
be used for displaying
lyrics.
Chord View Off, On Select “On” if the BK-5
should display chord
symbols along with the
lyrics.
Parameter Setting Explanation
SMF Quick Start Off, 2nd Bar,
1st Note
Off: Playback starts at
the very beginning of
the song file (which
may contain a few
silent bars).
2nd Bar: Causes play-
back to start from
measure 2 of the
selected Standard MIDI
File.
1st Note: This is basi-
cally the same as the
above, except that
playback starts on the
first note of the
selected song.
Perform Next
Song
Off, On At the end of the cur-
rent song, the next
song in the Perfor-
mance List starts auto-
matically. If the
Performance List step
refers to a rhythm, the
rhythm in question is
loaded, but you will
need to start manually
by pressing the [START/
STOP] button.
UP1 EQ/MFX
Link
Off, On If you select “on”, the
BK-5 selects suitable
MFX and equalizer set-
tings for each Tone
you assign to the
Upper1 part.
Rec Audio Level –24, –18, –12,
–6, +0 dB
Allows you to set the
recording level for
your own perfor-
mances (see p. 52). The
setting of the [VOL-
UME] knob does not
affect the recording
level. (Default setting:
+0dB)
Rec Audio Sync Off, On Off: Choose this set-
ting when you want to
start recording before
starting rhythm or
song playback.
On: Choose this set-
ting when you want to
be able to start record-
ing simultaneously
with rhythm/song
playback. When you
choose this setting,
pressing the [AUDIO
REC] button will stop
both playback and the
recorder.
Audio In Level 0~127 Allows you to set the
input level of the sig-
nals received via the
INPUT (STEREO) socket.
See also page 19.
Audio In Center
Canc
Off, On Select “On” if the “Cen-
ter Cancel” function
(see p. 42) should also
affect the signals
received via the AUDIO
INPUT sockets.
Parameter Setting Explanation
BK-5_US.book Page 68 Monday, November 14, 2011 12:43 PM