Filter
Top Products
33
Patch Mode
In the Patch Mode’s top screen, when press PARAMETER [ ], the various pedal
setting screens appear in the display. Press PARAMETER [ ] [ ] to select the
parameter you want to change.
The patch can set the following parameters.
• Patch’s ON Stream
• Patch’s OFF Stream
• The Transmit timing of the patch’s Off Stream
• ON Stream of the CTL pedal 1, 2
• OFF Stream of the CTL pedal 1, 2
• Amp Control
• Control Pedal, Expression Pedal, and Other Settings
• Patch Name
Creating Patches
If you switch patches before
saving the MIDI messages you
have input to the patch, any
edited content is lost. To save
the changes you have made,
carry out the Write procedure,
refer to “Storing (Saving)
Patches” (p. 44).
You can assign the following messages to ON streams and OFF streams.
Message Display
Channel
Message
Program Change Message PC
Control Change Message CC
Note On/Note Off Message N.ON/N.OFF
Channel Pressure Message C.PRS
Polyphonic Key Pressure Message K.PRS
Pitch Bend Message P.BEND
Realtime Message REALTIME MIDI START
MIDI STOP
MIDI CONTINUE
System Exclusive Message SYSEX
FC-300_e1.book 33 ページ ２００７年４月２４日 火曜日 午前１０時１０分